Home Sold Machines Sold Machines One Sided End Tenoning Machine Homag PROFI FL 20/07/15/S - SOLD

One Sided End Tenoning Machine Homag PROFI FL 20/07/15/S - SOLD

One Sided End Tenoning Machine Homag PROFI FL 20/07/15/S - SOLD

Type/Model: PROFI FL 20/07/15/S
Year of construction: 2003
Machine Condition: Good
Price: SOLD
Description:

SOLD

One Sided End Tenoning Machine Homag PROFI FL 20/07/15/S

Construction Year: 2003


Technical Details:

Feed 10-40 m / min
Fly coach on the side of the movable part, right 400mm
Ejection of the plate after the tape on the left part fixed to 20 mm
Working height up to 950 mm chain
Working width double sided min 220 mm
Working width double sided max 1500 mm
Number of carriers, pins 18 x links; 18 x rechts
Breakage of 500 mm carriers
Tape table at the outlet of 500 mm
Freestanding belt conveyor at outlet 1000x1200 mm
Equipment in aggregates

Aggregate
11 kW; 100 Hz; 6000 Upm, for formatting from max 19 mm excess. Receipt of pieces for the note sheet aggregate, double suction cover.
Adjustable 15 ° at 60 mm plate extension, tool diameter max. 250 mm, incl. electronic inverter with brake function. The unit shaft length is 75 mm. Hydrosystem D = 40 mm replacement

Milling aggregate
1 milling motor, unit for performing notching (groove) of the back of the boards from above, 6.6 kW; 100Hz; 6000 Upm; electropneumatic, adjustable 90 °, tool diameter max. 200 mm, rotated by 6 degrees, including an electronic frequency converter with motor braking function and extension of noise protection. Additional foot for grooving and cutting, working width 300-500 m, for extending the 30 mm format; support plate made of wooden plywood; diameter of the 400 mm cutting tool; diameter of tools for grooves 350-370 mm; material thickness up to 30 mm

Standard milling aggregate
1 milling motor for undercutting, 2.2 kW; 100 Hz; 6000 Upm, adjustable 180 °, tool diameter max. 200 mm, spindle diameter 30 mm

Standard milling aggregate
1 milling motor for undercutting, 2.2 kW; 100 Hz; 6000 Upm, adjustable 180 °, tool diameter max. 200 mm, spindle diameter 30 mm

Special milling unit
1 milling motor for cutting, 11 kW; 50 Hz, 180 ° adjustable, tool diameter max. 200 mm, including an electronic frequency converter with motor braking and extension functions.

The machine is sold without the roller conveyor visible in the pictures in front of the machine and without the conveyor belt visible in the pictures behind the machine.


Contact Person: Kamil Trębacz
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Phone: +48 602 581 674



Tags: HOMAG,  Used HOMAG,  HOMAG PROFI,  HOMAG PROFI FL,  Homag PROFI FL 20/07/15/S,  HOMAG Tenoning Machine
   Hits: 177
RSS Feeds